【CentOS7.6】yum 报错：Could not retrieve mirrorlist http://mirrorlist.centos.org

一、报错

1.报错内容如下

在使用 yum makecache 命令时报错，在 yum install -y xxx 的时候报错等等

[root@hcss-ecs-a901 yum.repos.d]# yum makecache
Loaded plugins: fastestmirror
Determining fastest mirrors
Could not retrieve mirrorlist http://mirrorlist.centos.org?arch=x86_64&release=7&repo=sclo-rh error was
14: curl#6 - "Could not resolve host: mirrorlist.centos.org; Unknown error"


 One of the configured repositories failed (Unknown),
 and yum doesn't have enough cached data to continue. At this point the only
 safe thing yum can do is fail. There are a few ways to work "fix" this:

     1. Contact the upstream for the repository and get them to fix the problem.

     2. Reconfigure the baseurl/etc. for the repository, to point to a working
        upstream. This is most often useful if you are using a newer
        distribution release than is supported by the repository (and the
        packages for the previous distribution release still work).

     3. Run the command with the repository temporarily disabled
            yum --disablerepo=<repoid> ...

     4. Disable the repository permanently, so yum won't use it by default. Yum
        will then just ignore the repository until you permanently enable it
        again or use --enablerepo for temporary usage:

            yum-config-manager --disable <repoid>
        or
            subscription-manager repos --disable=<repoid>

     5. Configure the failing repository to be skipped, if it is unavailable.
        Note that yum will try to contact the repo. when it runs most commands,
        so will have to try and fail each time (and thus. yum will be be much
        slower). If it is a very temporary problem though, this is often a nice
        compromise:

            yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true

Cannot find a valid baseurl for repo: centos-sclo-rh/x86_64

2.原因分析

我们的服务器没法访问外面的网络，所以我们需要配置镜像源

二、解决

1.进入目录

先进入目录 /etc/yum.repos.d

cd /etc/yum.repos.d

2.打开 xftp

在这里插入图片描述

3.备份文件

备份这三个文件就行了
在这里插入图片描述

4.编辑 CentOS-Base.repo 文件

！！！警告，在编辑文件的时候，你肯定是复制黏贴下面的内容的。但是，vim 编辑器会有个黏贴反应时间，所以大概率你在黏贴了内容之后，最开头的内容会缺少 1-5 个字符，你需要手动补全，下面的编辑也是一样！！！
编辑 CentOS-Base.repo 文件：

vi /etc/yum.repos.d/CentOS-Base.repo

替换内容为：

[base]
name=CentOS-$releasever - Base
baseurl=https://mirrors.aliyun.com/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[updates]
name=CentOS-$releasever - Updates
baseurl=https://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[extras]
name=CentOS-$releasever - Extras
baseurl=https://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

[centosplus]
name=CentOS-$releasever - Plus
baseurl=https://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

5.编辑 CentOS-SCLo-scl-rh.repo 文件

编辑 CentOS-SCLo-scl-rh.repo 文件：

vi /etc/yum.repos.d/CentOS-SCLo-scl-rh.repo

替换内容为：

[centos-sclo-rh]
name=CentOS-$releasever - SCLo rh
baseurl=https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/rh/
gpgcheck=1
enabled=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7

6.编辑 CentOS-SCLo-scl.repo 文件

编辑 CentOS-SCLo-scl.repo 文件：

vi /etc/yum.repos.d/CentOS-SCLo-scl.repo

替换内容为：

[centos-sclo-sclo]
name=CentOS-$releasever - SCLo sclo
baseurl=https://mirrors.aliyun.com/centos/$releasever/sclo/$basearch/sclo/
gpgcheck=1
enabled=1
gpgkey=https://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7